Automation for swing and sliding gates
Automating your gate facilitates and optimizes its use. A gate with automation can be controlled from a distance or opens automatically when approached.
However, every gate is different. A heavier gate needs a heavier control than a light gate. If the chosen automation for the gate is not powerful enough, it will wear out faster and needs to be replaced. So choosing the right automation is important.
Below you will find our automation solutions for both heavy and light swing and sliding gates. But when are we talking about a heavy gate and which automation is suitable for which application? We would be happy to help you with that. Contact us for more information.
We also automate existing gates. Even if it is a small pedestrian gate or a large farm gate.
This unique articulated arm construction can be installed in a space of just 125 mm between the opened wing and the side wall. This system is operated through a separate control box.
MCH150S - swing gate
Thanks to it's compact design, the MCH150B can be attached almost invisibly.
MCH150B - swing gate
This automation system is extremely suitable for closed or metal gates with a wing breadth and height equal to or greater than 2 metres.
MCH450 - swing gate
This electromechanical articulated arm system is the best solution for large pivot gates.
MCH650 - swing gate
The SLG T08 incorporates the latest technological gadgetry. The drive can be set up and programmed without opening the housing.
SLG T08 - sliding gate
The SLG T20 is the big brother of the SLG T08. This heavyweight installation is mainly suitable for industrial purposes.
SLG T20 - sliding gate
This automation system meets professional standards. Its SLG operation opens gates at the speed of 16.50 m/min.
SLG - sliding gate
JIM operation is suitable for pivot and sectional doors. It opens by sliding along a rail attached to the garage ceiling. The door is therefore suspended against your garage ceiling when it is open.